Home, Comfort, Lifestyle


The Cricut machine is a great crafting tool. It allows you to make precise cuts, to get the design that you want.

The first step is to put the material on the mat. You’ll then need to insert the mat into the machine. Let’s look at the steps you need to go through to do this.

Select the Right Material

The first thing you need to do is decide what type of material you want to use. The Cricut machines will be able to cut a wide selection of materials. You’ll be able to use card stock, paper, fabric, and poster board.

Once you know what you want to use, set the Cricut accordingly. You’ll need to adjust the dial on the top of the machine. This will automatically adjust the pressure to suit the material you are using.

Remove the Cover from the Mat

Once you’ve got the right setting, you can start preparing the mat. It should come with a plastic cover.

This is designed to protect the adhesive surface from dust. It also ensures that things don’t get stuck to the mat. Because of this, you’ll need to put the cover back on the mat when you are finished using the machine.

Place Materials on the Mat

Now you are ready to load the materials onto the Cricut mat. As you’re doing this, you want to make sure that the textured side is facing outwards.

Check that the materials have stuck to the mat properly. There shouldn’t be any raised sections. There shouldn’t be any gaps between the mat and the materials.

Loading the Mat into the Cricut Machine

Finally, you will be ready to load the mat into the machine and start cutting. To do this, open the Cricut. Now you can orient the mat. Make sure the top of the mat is facing the rollers.

Then, place it underneath the mat guides. They will be on both sides of the machine. Next, you’ll need to press the mat against the rollers. You’ll need to use firm pressure.

Finally, push the load/unload button on the control panel at the top of the machine. This will have two arrows, one pointing upwards, the other pointing downwards.

From here, the machine will start cutting on its own. If you have any concerns, press the button on the far right of the control panel. This will stop the machine. You can then unload the mat.


Cricut machines are one of the best crafting aids. They will allow you to design and cut unique designs.

There is a huge library of free designs and many more that can be bought for a small fee. Or you can use software to design your own. Though these machines are powerful, they are easy to use.

There are plenty of online resources that will walk you through the process of using your Cricut. If you want to learn more about this tool, check out this Cricut machine compilation and buying guide.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge