Furnace Maintenance Tips to Keep You All Warm During Winter
The winter season is all about staying warm. However, if your heating system fails during the winter, it may begin to give you a head start on routine repairs and maintenance; that is why regular furnace servicing saves you time and energy while ensuring that your machine operates safely for an extended period.
Unmaintained furnaces can cause gas leaks and other severe concerns, such as the release of carbon monoxide. Keeping your furnace system clean will also help you avoid malfunctions, boost efficiency, and extend the system’s lifetime by corrosion protection and replacing it before it becomes damaged.
As a result, keeping your furnace is critical to keeping your family members healthy. Knowing how to tune your furnace will help you keep your HVAC system working properly. Here are some of the best essential regular furnace maintenance tips that you should perform to keep them working well.
Check Whether Your Thermostat is Working Properly:
The first step for determining how to tune up your furnace is checking whether your thermostat is working, then your furnace isn’t in good condition. Your thermostat may be defective if you don’t hear the furnace start up within a minute. Dust and poor calibration can affect the performance of thermometers. Ensure your thermometer’s calibration is accurate by removing the lid and inspecting the connections. When all of the wire connections are in place, they will work properly.
Always Keep The Air Filter Clean:
Cleaning the air filter will minimize dust particles from building in your furnace. If your furnace has too much dust in its air filter, it might cause the furnace to malfunction and
perhaps cause a long-term problem. Make sure your filter is cleaned regularly for optimal performance.
Examine The Flame:
Check that your furnace flame burner is operational. How does it appear? If the flame burner inside the furnace is blue, it is in good condition, and if you see yellow or orange flames inside the burner, it shows that it has dirt, which can lead to other issues like decreased combustion efficiency. A flickering flame indicates insufficient oxygen in the combustion, which can lead to problems such as gas leaks.
Keep An Eye On The Control Valve:
For safety reasons, the majority of the furnace incorporates a control valve. If you discover that your furnace is not providing enough heat, this is the first item to investigate. The control valve of a gas furnace is located on the supply line; make sure the valve is on and the gas is free to enter the HVAC. The furnace cannot produce heat if there is nothing to burn.
Always Double-check That Your Carbon dioxide Detector is Working:
Breathing clean air is critical because letting carbon dioxide build up in your home is extremely hazardous to your family. Always test your carbon dioxide detector to ensure that you are notified if your furnace develops a leak.
Drain The Drainage Tube:
A furnace always produces a small amount of water when it is heated. Some of this evaporates as exhaust vapor. However, the remaining amount of gutters from the power exhaust component to a drop pan are transmitted with the AC.
If the furnace drainage tube becomes clogged, water may enter the system and cause the flame detector to shut down the system. So, check if the drainage tube is clean by disconnecting it from the manifolds and cleaning it with compressed air. Flush the tube with vinegar as well.
The Damper Should Be Closed:
Make sure the upstairs damper is closed when the furnace outside grows cold. Taking advantage of the rising heat will keep the furnace from producing heat if it is open.
Tune Up Your Furnace With a Professional:
You need a specialist for your HVAC if the issue still doesn’t get resolved. You can avoid a breakdown in the winter season; by scheduling professional furnace maintenance.
Furnace maintenance, such as cleaning your compressor, pipes, and furnace burners, keeps furnace disasters from jeopardizing your safety and your bank account when winter arrives for good. At the very least, you should test your thermostat, turn on the furnace once, and replace your filter for the season. If your furnace refuses to start, you may have more serious issues and will need professional help. Use these suggestions to keep your furnace in good working order.